AUTOWATCH GHOST IMMOBILISER
VEHICLE SECURITY UPGRADE SERVICEs
ULTIMATE THEFT PROTECTION FOR YOUR VEHICLE
Autowatch Ghost Immobilisers in London, Hertfordshire, Essex & Middlesex
Protect your car from modern theft with the Autowatch Ghost Immobiliser. This advanced CAN-Bus security device adds an invisible layer of defence to your vehicle, preventing thieves from starting it even if they have your keys. The Ghost is the world’s first aftermarket CAN bus immobiliser – no PIN, no start. It safeguards against key cloning, hacking, and even key theft. The only way a thief could take a Ghost-protected car is by towing it away, and even then, they can’t drive it off! With the Ghost installed, you gain peace of mind knowing your car won’t move an inch without your secret PIN code.
How Does the Ghost Immobiliser Work?
The Autowatch Ghost works by communicating directly with your vehicle’s ECU through the CAN data network. When you attempt to start the car (either by turning the key or pressing the Start button), the Ghost intervenes to block the engine start unless the correct PIN input is detected. It effectively creates a secret handshake that only you know.
If the sequence of button presses is not entered, the Ghost will keep the engine immobilised – preventing ignition and even, in some cases, preventing gear selection or engine running. Because it’s connected to the car’s CAN-Bus, the Ghost can turn off critical systems in a subtle way that won’t trigger any warnings on the dashboard but will firmly keep the vehicle immobilised. There’s no siren and no flashing light – the security is silent and stealthy. Unlike traditional alarms or trackers, the Ghost doesn’t rely on any signals that could be scanned or jammed. This means thieves cannot use typical electronic hacking tools to sniff out or disable the system.
In practice, using the Ghost is simple: when you’re ready to drive, you turn on the ignition and then input your PIN code by pressing the pre-chosen sequence of buttons (for example, “window up, window down, horn, horn” – you can choose a combination that’s intuitive for you). Once the Ghost recognises the correct code, it seamlessly allows the engine to start as usual. If an intruder attempts to start the car without knowing the code, the Ghost will keep the engine disabled even if they have the key – effectively turning your vehicle into a brick for anyone but you.
What we're getting up to:
HOW DOES THE GHOST IMMOBILISER WORK?
The Autowatch Ghost works by communicating directly with your vehicle’s ECU through the CAN data network. When you attempt to start the car (either by turning the key or pressing the Start button), the Ghost intervenes to block the engine start unless the correct PIN input is detected. It effectively creates a secret handshake that only you know.
If the sequence of button presses is not entered, the Ghost will keep the engine immobilised – preventing ignition and even, in some cases, preventing gear selection or engine running. Because it’s connected to the car’s CAN-Bus, the Ghost can turn off critical systems in a subtle way that won’t trigger any warnings on the dashboard but will firmly keep the vehicle immobilised. There’s no siren and no flashing light – the security is silent and stealthy. Unlike traditional alarms or trackers, the Ghost doesn’t rely on any signals that could be scanned or jammed. This means thieves cannot use typical electronic hacking tools to sniff out or disable the system.
In practice, using the Ghost is simple: when you’re ready to drive, you turn on the ignition and then input your PIN code by pressing the pre-chosen sequence of buttons (for example, “window up, window down, horn, horn” – you can choose a combination that’s intuitive for you). Once the Ghost recognises the correct code, it seamlessly allows the engine to start as usual. If an intruder attempts to start the car without knowing the code, the Ghost will keep the engine disabled even if they have the key – effectively turning your vehicle into a brick for anyone but you.
WHAT IS A GHOST IMMOBILISER?
A Ghost immobiliser is a small electronic immobiliser system that connects to your car’s internal network (CAN bus) to prevent engine start unless the correct PIN code is entered. There are no key fobs, no extra LED indicators, and nothing visible in the cabin – so potential thieves won’t even realise an immobiliser is in place. Unlike a factory-fitted immobiliser or alarm, the Autowatch Ghost allows you to use existing buttons in your vehicle (such as those on the steering wheel, door panel, or centre console) to enter a unique disarm code.
Think of it like an ATM PIN for your car’s ignition. If the code isn’t entered, the engine won’t start. This stops tech-savvy criminals in their tracks, even if they manage to clone your key’s signal or bypass your keyless entry system.
Key features of the Ghost Immobiliser include:
WHY CHOOSE GML AUTO KEYS FOR CAR CODING?
One great advantage of the Ghost Immobiliser is its broad compatibility. It works with almost all modern car and van models that have a CAN-Bus system – from Audi, BMW, Mercedes, and Volkswagen to Ford, Toyota, Land Rover, and many more. Whether you drive a luxury SUV, a family sedan, or a small van, chances are the immobiliser can be installed to protect it. (If you’re unsure, our team can advise on your specific make/model. In rare cases where Ghost may not be suitable, we’ll recommend an alternative security solution.)
Professional installation is crucial for the Ghost Immobiliser, and at GML AutoKeys, we specialise in just that. Our skilled technicians are highly experienced with vehicle electronics and immobiliser systems. We offer a fully mobile installation service – we come to
After installation, our technician will give you a thorough demonstration of how the Ghost works. We’ll help you choose and program your initial PIN code (and show you how to change it whenever you want). You’ll also receive a Ghost Immobiliser user manual, an emergency override code card, and an official installation certificate for your records (proving that a TASSA-approved immobiliser is installed – which can be useful for insurance). If you opt to use the smartphone app, we’ll pair your device and ensure it’s communicating with the Ghost for seamless disarming via Bluetooth. We pride ourselves on making the whole process easy and friendly – you’ll know exactly how to use your new security system before we leave.
WHY CHOOSE GML AUTOKEYS FOR GHOST IMMOBILISER INSTALLATION?
Choosing the right installer is as important as choosing the right security system. GML AutoKeys is a trusted automotive locksmith and security specialist serving London and the surrounding counties (Essex, Hertfordshire, Middlesex). Here’s why vehicle owners turn to us for Ghost Immobilisers and other security upgrades:
READY TO SECURE YOUR VEHICLE?
Protect your pride and joy today with an Autowatch Ghost Immobiliser installation by GML AutoKeys. Contact our friendly team for a free, no-obligation quote or to ask any questions. We’ll explain everything and get you booked in at your convenience. Secure your vehicle and enjoy the peace of mind that comes from knowing your car won’t go anywhere without your say-so.
Call us on 07733 886865 or send us a message to get your Ghost Immobiliser installed. We’re here to help you stay one step ahead of the thieves with the best in modern vehicle security. Your car’s safety is our priority – let’s keep your vehicle where it belongs: with you and not in the hands of criminals.